ADT® Authorized Dealer Serving Bowling Green & Surrounding Areas
ADT smoke detector in a Bowling Green family room
May 24, 2021

Monitored Fire Alarms Vs Smoke Detectors In Bowling Green

The National Fire Protection Agency recommends a smoke detector.  At the very least, your house should have a smoke detector in every bedroom, the hall leading to sleeping quarters, and on each story of the structure (don’t forget the basement). However, should you just buy an ordinary smoke detector, or should you go for for a more sophisticated monitored fire alarm? In the Bowling Green monitored fire alarm vs smoke detector debate, you quickly see why one component is a clear choice.

Ordinary Smoke Detectors Only Detect Smoke

True to their name, ordinary smoke detectors only go off when they sense an ample amount of smoke. Then they go off -- usually with a high-decibel tone -- until you reset the component. Naturally, if nobody’s home, who will hear the alarm.

Optimally, you should get dual sensor smoke detectors that are responsive for both smoke from both flaming and smoldering remains. It might be best to pair your detectors so all alarms go off in unison. This way, you always find out if there's a fire from above, even if it takes place from a short circuit in the basement.

Monitored Fire Alarms Alert You To Fire And Smoke When You Are At Home Or Away

A monitored fire alarm aesthetically appears and mounts the exact same way as your standard smoke detector. If they discover fire conditions around the premises, they'll emit a high-pitched alarm. However, there's a myriad of functions that your monitored fire alarms are going to do that your smoke detectors isn’t able to.

For starters, advanced sensors will scan for rising hot air levels in addition to smoke. When they find flames, they'll alert your ADT monitoring team as well as set off the piercing alarm. That allows you to concentrate on getting out of the house as your monitoring specialist calls emergency services. And since your monitoring center is on alert 24/7, your alarms never fail to notify a professional no matter where you are.

Monitored fire alarms typically link into your Bowling Green home security system. Other tools paired to the same system can be programmed to respond when your fire alarms go off. For example, your linked thermostat can instinctively power the ventilation fan, which should help hinder flame spread. Or have your whole home jump into motion when the lights switch on, your smart locks unlock, and your other alarms deactivate. You can also have your system send your phone an alert to know that your home's in danger when you're out of town.

ADT monitored heat detector in Bowling Green 

The Decision In Monitored Fire Alarms Vs. Smoke Detectors in Bowling Green

It's pretty easy to determine what wins in a direct match-up between monitored fire alarms and smoke detectors. You just receive so much more with a monitored fire alarm.

Run-of-the-Mill Smoke Detectors:

● Triggers high-decibel siren when the device senses ample of smoke

Monitored Fire Alarms

● Sounds high-decibel alarm when the device senses an abundance of smoke

● PLUS has sensors for high heat

● PLUS works with your ADT home security system

● PLUS notifies a 24/7 monitoring center which will contact emergency personnel

● PLUS shoots you a notification to your phone

Get Monitored Fire Alarms In Your Bowling Green Home Security System

To pull the most from your monitored fire alarms, like them to a powerful security system, like ADT. Lucky for you, Secure24 Alarm Systems can craft your ADT home security deal to incorporate fire and safety alarms. Just call (270) 262-8554 or fill out in the form below to start.