Categories

False alarms and system glitches can be frustrating, and more importantly, might prevent your home security system from working how it should. Thankfully, most troubles, from dead batteries to false alarms, are easy to correct. Explore our suggestions for troubleshooting your home alarm system in Bowling Green. We’ll help keep your family members protected and your system running smoothly.

Test Your Home Security System In Bowling Green

One of the best ways to troubleshoot your home’s security is to test it! Modern systems have a test mode so you don’t accidentally initiate an emergency response from monitoring agents. Once in test mode, take these steps:

• Activate your system as you normally would when heading out.
• Open a window or door protected by a contact sensor, or test other sensors. Close the door or window so it doesn’t prompt the alarm as you turn the system back on.
• Let the alarm sound for 60 seconds to make sure a signal is dispatched to the security company and an entry is made in the alarm activity log.
• Continue testing equipment as needed
• Inspect the system activity log to confirm that everything’s working.

Don’t worry, monitoring specialists can see that your system is undergoing a test. Just be sure to turn test mode off when complete. It’s smart to test monthly or anytime you change your home’s internet or phone connectivity.

Check The Position And State Of Motion Detectors

Although an essential element of your alarm system, motion sensors are prone to false alarms. Do your part to prevent them with some simple troubleshooting.

• Do a physical check. Are there items that could shift within range of the sensor, like a curtain caught in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and grime can cause malfunctions. Ensure the face is clean.
• Does the motion detector offer pet immunity you can activate? Some can be programmed to disregard pets weighing as much as 100 pounds.
• When was the battery changed? A nearly depleted battery may affect performance or result in false alarms.
• Is the sensor aimed toward a heat source? Too much heat from sunlight or a fireplace can cause an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Warnings

One helpful perk of modern home security systems is that they’ll notify you when batteries are getting low. If your system has a control panel or app, you’ll usually find notifications there. Depending on your system, you may detect an intermittent beep when batteries are getting low. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that will have to be replaced every year or two. It’s wise to keep batteries ready and establish a replacement schedule. Some systems also come with a rechargeable backup battery for the central control panel. This battery keeps your system functioning if you have a power outage and should recharge itself once the electricity is working again. If it fails to recharge, you should replace it.

Troubleshooting Is Simple With ADT Home Security In Bowling Green 

As the foremost name in home security, ADT builds systems that offer unsurpassed functionality and protection. Accessing test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always get alerts when a sensor battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Bowling Green home. Dial (270) 262-8554 or submit our form today!